T-rf78s galvanized steel light poles, stock available - Port Elizabeth

Monday, 2 March 2020

Item details

City: Port Elizabeth, Eastern Cape
Offer type: Sell


Phone 078 015 5016

Item description

Product Specifications

Pole Shaft - The pole shaft is a one-piece assembly conforming to ASTM A595 Grade A or A572 Grade 55 with a constant linear taper of 0.14 in/ft.
Pole Top - A removable top cap is provided for poles receiving drilling patterns for side-mount luminaire arm assemblies. Other pole top options include Tenon Top, Top Cap Only or Open Top which is typical when the pole top diameter matches the necessary slip-fit dimensions.
Hand Hole - A reinforced hand hole with grounding provision is provided at 1'-6" from the base end of the pole assembly. Each hand hole includes a cover and cover attachment hardware. Poles with a 5.90" base diameter are supplied with a 3" X 5" rectangular hand hole. All other pole assemblies are provided with a 4" X 6.5" oval hand hole (dimensions are nominal).
Base Cover - A two-piece full base cover fabricated from ABS plastic is provided with each pole assembly. Additional base cover options, including a cast aluminum and fabricated steel cover, are available upon request. A two-piece steel full base cover is required for some applications depending on the finish requirement and/or pole base square. Factory reserves the right to provide a two-piece steel full base cover on some applications depending upon the finish requirement and/or pole base diameter.
Anchor Bolts - Anchor bolts conform to ASTM F1554 Grade 55 and are provided with two hex nuts and two flat washers. Bolts have an "L" bend on one end and are galvanized a minimum of 12" on the threaded end.
Nut Covers - Nut covers can be substituted on most models.
Hardware - All structural fasteners are galvanized high strength carbon steel. All non-structural fasteners are galvanized or zinc-plated carbon steel or stainless steel.
Finish - Standard finishes are either Galvanized or Finish Painted. Additional finish options including Finish Paint over Galvanizing are available upon request.
Design Criteria - Standard EPA (Effective Projected Area) and weight values are based on Standard Commercial Criteria (with 1.3 gust factor) for top mounted fixtures only. Consult the factory on loading criteria for side mounted luminaires and/or brackets. Satisfactory performance of light poles is dependent upon the pole being properly attached to a supporting foundation of adequate design.

Technical Specs

Weight (lbs)-265
Mounting Height (ft)-30
OD Base (in)-8.0
OD Top (in)-3.8
Wall Thickness-11ga
Bolt Circle on Center (in10.5 - 11.5
Bolt Projection (in)-3.88 - 4.38
Anchor Bolt Size (in)1.00 x 36.00 x 4.00

We sell different types of galvanized light poles, among them are the T-RF78S GALVANIZED STEEL LIGHT POLES,

Light up your area with Lighting Masters (PTY) LTD

For enquiries, Contact us on

CELLPHONE NO- 078 015 5016
TELEPHONE NO- 041 004 2321
Email address- sales@lightingmasters.co.za
website - www.lightingmasters.co.za

Physical Address
9 Burman Rd, Deal Party, Port Elizabeth, Eastern Cape, South Africa
Mark as scam